# text: "Sorry, an error ocurred.\nThe installation was aborted leaving your system untouched."
DITL_4_IOError.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=148 y1=92 x2=220 y2=112
# text: "Cancel"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=12 x2=228 y2=76
# text: "Sorry, ^0^1"
DITL_10_Success.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=191 y1=134 x2=263 y2=154
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=312 y2=118
# text: "Installation into “^0” was successful. The old files (^1) were ^2.^3"
DITL_11_Success2.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=186 y1=93 x2=258 y2=113
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=12 x2=296 y2=86
# text: "Installation into “^0” was successful. ^1^2^3 "
DITL_12.txt
# 1 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=6 y1=7 x2=308 y2=41
# text: "Copying “CCLs ” folder to the CompuServe Preferences folder on your System volume."
DITL_13_Failure.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=186 y1=93 x2=258 y2=113
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=12 x2=295 y2=77
# text: "An error occurred during installation into “^0”. The installation did not complete. Sorry."
DITL_15_noDiskSpace.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=192 y1=92 x2=264 y2=112
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=12 x2=305 y2=77
# text: "Not enough space available on “^0”. ^1K needed; ^2K available."
DITL_20.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=192 y1=92 x2=264 y2=112
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=86 y1=92 x2=158 y2=112
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=72 y1=12 x2=294 y2=76
# text: "Really replace existing files in “^0”?"
DITL_25.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=229 y1=131 x2=301 y2=151
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=73 y1=12 x2=333 y2=107
# text: "A file or folder by the name of “^0” already exists. You may select it and Open it to install there, or use the “New Folder” button to create a folder with a different name."
DITL_30.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=174 y1=143 x2=422 y2=164
# text: "Boot Volume\'s Prefs Folder"
# item 1: BUTTON (0x04) enabled
# bounds: x1=174 y1=181 x2=422 y2=202
# text: "Install Target Volume\'s Prefs Folder"
# item 2: BUTTON (0x04) enabled
# bounds: x1=174 y1=213 x2=422 y2=234
# text: "MacCIM‚Ñ¢\'s Folder"
# item 3: BUTTON (0x04) enabled
# bounds: x1=73 y1=142 x2=155 y2=162
# text: "Explain"
# item 4: BUTTON (0x04) enabled
# bounds: x1=74 y1=214 x2=156 y2=234
# text: "Cancel"
# item 5: TEXT (0x88) disabled
# bounds: x1=74 y1=12 x2=423 y2=110
# text: "You are installing to a target volume containing an inactive system. A folder of connection scripts, the “CCLs” folder is normally copied to the preferences folder of the boot volume.\n\nWhere would you like your “CCLs” folder placed?"